ارسال تصویر DYS-MI200 Pigtail Version

ماژول ارسال تصویر MI200 PIGTAIL یکی از نمونه های طراحی شده فرستنده تصویر برند DYS است که طراحی جدید منجر به انتخاب آسان فرکانس ماژول فرستنده می شودماژول می تواند کانال ها را از طریق کانال SH پایین ریموت تغییر دهد. هنگامی که سیم سیگنال ماژول گیرنده کانال SH را متصل می کند ، کاربران می توانند از تنظیمات کانال SH برای خروجی استفاده کنند

Operating Instructions

Same way to operate the SH channel bottom of the remote as the switch of transmitter’s module.

*The factory 200mw (LED blue),Long press 5 seconds switch to 25mw (LED RED).”L “stands for 25mw and” H “stands for 200mw on the screen.

*Long press 3 seconds to switch FR/CH.

*Short press to choose the frequency.

Setting of SH channel bottom of the Remote

*At “Frsky X4R”receiver’s 3 channel and sbus remote module’s 4 channel will be same channel for output at the same time.

*Need to enter mixer page of Frsky,using copy function to send 4 channel backward,example, send backward channel 1 to channel 2,and so on.

*After sending channel backward,the extra channel will need to be deleted.The CH1 is for the bottom to control transmitter.

*Connect F3 adjustable parameter software,enter the ground station,the channel may be mess up.Please enter command page of the ground station,to revise the right channel and save it for proper working.

*Use CH1 channel port of “X4R”,the order is 1AETR234.

*With PMW remote mode,having one channel from SH output channel  is ok to use.

*Above setting is similar with the other remote controller.

Basic Data:

Transmission Frequency:5.8Ghz

Transmission Power:25-200MW

Frequency point:40CH

Transmission distance:1000M

Input voltage:5V

Antenna connector:SMA Hole

Working current:500mA/5V

Operating temperature:-10-85℃

Video Format:NTSC/PAL

Video Broad band:8M

Weight:9.19g

Size: L23*W22*H8mm