سیم قلع کش قطر 30 - BST-3015
کاربرد:
Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
Remove the desoldering wick after the solder has been absorbed.
Cut off the used section of the wick using nippers.
Repeat steps 1 2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63 Percent and 60 Percent (tin content) have good absorbability
نمایش محصول: